English
8
Proper Hand Position (Fig. E)
WARNING:
To reduce the risk of serious
personal injury,
ALWAYS
use proper hand position
as shown.
WARNING:
To reduce the risk of serious
personal injury,
ALWAYS
hold securely in anticipation of
a sudden reaction.
Proper hand position requires one hand on the main
handle
13
and one hand on the auxiliary handle
4
.
Installing and Removing the Battery Pack
(Fig. D)
nOTE:
For best results, make sure your battery pack is
fully charged.
To install the battery pack
11
into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release
button
12
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of this manual
running, you may release the lock-off button. To turn the
appliance off, release the variable speed trigger switch.
WARNING:
Never attempt to lock the
trigger in the on position.
Speed Control Switch (Fig. A, F)
This string trimmer gives you the choice to operate at a
more efficient speed to extend the runtime for larger jobs, or
accelerate the trimmer speed for high- performance cutting.
To extend runtime
, pull the speed control switch back
toward the battery housing
10
into the "LO" position. This
mode is best for larger projects that require more time
to complete.
To accelerate the trimmer,
push the speed control
switch
3
forward toward the auxillary handle
4
into the
"HI" position. This mode is best to cut through heavier
growth and for applications that need higher RPM.
nOTE:
When in "HI" mode, runtime will be decreased as
compared to when trimmer is in "LO" mode.
Fig. F
3
2
1
Trimming (Fig. G, H)
With the trimmer on, angle it and swing side to side as
shown in Fig. G.
Maintain a minimum distance of 24" (610 mm) between the
guard and your feet as shown in Fig. H.
Fig. G
Fig. D
11
12
4
13
Fig. E
Switching Trimmer On and Off (Fig. A, F)
To turn the appliance on, squeeze the lock-off button
2
and
then the variable speed trigger switch
1
. Once the unit is
