APP
Scan the QR code or find “Smart Life” from GooglePlay/APP Store to
get the free application for Android or iOS. Upon installation of APP
on your phone, the app will guide you through registering, connecting
the detector to the internet.
Add your detector
1) Smartlink(EZ) mode
Tap
Add Device
or “
+
”, select
Security & Sensors
from
Add
Manually
, then tap
Gas Detector(Wi-Fi).
Choose your local
Wi-Fi and input password(Only 2.4GHz Wi-Fi network is
supported).
Power your detector off. Press and hold the button, then
power your detector on, don’t release until the screen says
“
Smart Mode, Connecting
”.
Tap
Fast flashing
, wait the configuration finishes.Tap
to
name your detector ,then tap
Done
.
2) Soft AP Mode
Please change to
Soft AP Mode
if the configuration fails in
Smarlink Mode.
Power your detector off. Press and hold the button, then
power your detector on, don’t release until the screen says
“
Smart Mode, Connecting
”.Click the button again and the
screen says “
AP Mode, Connecting
”
.
。
Tap the top right icon in APP to select “
AP Mode
”, then tap
“
Slow flashing
”.
Tap
Confirm > Go to Connect
, then choose the Wi-Fi
hotspot named “Smartlife-XXXX” in your Wi-Fi list. Go back to
your app to wait the Wi-Fi configuration finishes
