If sensor is fault
In case of sensor fault
，
the yellow fault indicator flashes and “
Fault
”is
displayed on the screen.
Testing
Without alarm, click the button or tap
in APP to test the detector.
The screen says “
Ready for test
”and you hears “
This is a mere
test.We'll alarm a sound.The alarm is loud.The test starts
”The
detector starts to test low level gas leak, high level gas leak alarm,
heat alarm and valve/manipulator control. When test is finished, the
screen says “
Test finished. Please reset valve
”.If everything is OK,
“
The test is finished.Everything is OK
”is heard and a same text
notification “”is pushed to your mobile. In case of sensor failure, you
hears “
The sensor failed. Check now
”and your mobile get the
same text notification”.
Clock adjustment
The date and time are usually updated automatically over the
network if your detector is connected to network via Wi-Fi. If NOT
you can adjust the date and time by the button.
Without alarm, press and hold the button until the date and time
setting window is displayed. The digit is increased automatically with
loop from year, click the button to enter the displaying digit you want
and the screen skips to the next digit to be entered.When all date
and time digits are entered, all digits are green and the screen says
“
Long click to save
”, press and hold the button until you hear the
tone.
If no operation in 30 seconds, the detector exits the data and time
adjustment, all digits have been set are not be saved.
