CPT CPDP-104, Руководство по сборке

Страница: 2 / 10

GENERAL SAFETY RULES
Safety is a combination of common sense, staying alert and knowing how to use a tool.
WARNING: To avoid mistakes that could cause serious injury, do not attach Circle Guide For Drill Press
until you have read and understood the following:
1.
READ and become familiar with the entire installation instructions on
how to attach Circle Guide For Drill Press.
2.
LEARN the tool's application, limitations and possible hazards.
3.
REMOVE ADJUSTING KEYS AND WRENCHES . Form a habit of
checking to see that keys and wrenches are removed from drill press
before turning ON.
4.
KEEP WORK AREA CLEAN . Clutter areas and benches invite accidents.
5.
DON'T USE IN DANGEROUS ENVIRONMENT . Don’t use power tools in
damp or wet locations, or expose them to rain.
Keep work area well lighted.
6.
KEEP CHILDREN AWAY . All visitors should be kept at a safe distance
from work area.
7.
MAKE WORKSHOP CHILDPROOF with padlocks.
8.
DON'T FORCE THE TOOL . It will do the job better and safer at the
rate for which it was designed.
9. USING THE RIGHT TOOL . Do not force tool or attachments to do a
job for which it was not designed.
10.
USE PROPER EXTENSION CORD . Make sure your extension cord is in condition.
11.
DRESS PROPERLY . Do not wear loose clothing, neckties, or jewelry that
can get caught and draw you into moving parts. Wear protective
hair covering to contain long hair.
12.
ALWAYS WEAR SAFETY GLASSES WITH SIDE SHIELDS . Everyday
eyeglasses have only impact resistant-lenses, they are NOT
safety glasses.
13. SECURE WORK . Use clamps or a vise to hold work when practical,
it is safer than using your hand and frees both hands to operate
the tool.
14.
DO NOT OVERREACH . Keep proper footing and balance at all times
15.
DISCONNET TOOLS . When not in use or when changing attachments,
blades, bits, cutter, etc. all tools should be disconnected from
power source.
16.
AVOID ACCIDENTAL STARTING . Be sure switch is off when plugging
in any tool.
17. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN THE POWER OFF.
DO NOT LEAVE TOOL UNTIL IT COMES TO A COMPLETE STOP.
18.
PROTECT YOUR LUNGS . Wear a face or dust mask if the operation
is dusty.
19.
PROTECT YOU HEARING . Wear hearing protection during extended
periods of operation.
20. KEEP FINGERS AWAY FROM REVOLVING BITS.