CPT 4200 Series Скачать руководство пользователя страница 60

Страница: 60 / 72

To correct the first line of a tape (while recording or later) with or without a Search Code DO
NOT use the Record Locator. The following procedure should be used:

(1) Rewind the tape completely,

(2) Turn on RECord.

(3)

Re-enter the Search Code in the usual manner.

(4)

Retype the first record, including the carrier return or code that ends it.

(5) Turn off RECord.

STEPS FOR CORRECTING PREVIOUSLY RECORDED COPY USING THE RECORD LOCATOR

The Record Locator can be used to correct previously recorded copy, although it is recommended

that you follow the Same Tape Correction Procedure for the sake of simplicity.

This type of correction should be done only on the machine used for the original recording.

(1)

Locate the data to be corrected by skipping or reading to the beginning of the record to be
corrected. The incorrect record is now in the buffer.

(2) Turn on RECord.

(3)

Depress Line Correct once to reverse the tape

(4)

Record the record to be corrected, including the carrier return or code which ends the record.
You may add up to 15 characters to the record.

(5) Turn off RECord.

If the record to be corrected is the second record in a line, follow these steps:

(1)

Skip or read to the line following the record to be corrected.

(2) Turn on RECord

(3) Depress Line Correct twice.

(4) Record the record, including the carrier return.

(5) Turn off RECord.

Содержание 4200 Series









































































Результаты поиска

Содержание 4200 Series

Отзывы:

Похожие инструкции для 4200 Series

Бренды по названию

Популярные бренды

CPT 4200 Series, Руководство по обучению

Результаты поиска

Содержание 4200 Series

Отзывы:

Похожие инструкции для 4200 Series

Бренды по названию

Популярные бренды