CPT 4200 Series, Руководство по обучению

Страница: 49 / 72

DUPLICATION
When reading and revising as in the last sec-
tion, you are reading out through the type-
% . I t i s p o s s i b l e , h o w e v e r , t o t r a n s f e r
information from one tape to another bypass-
@ the typewriter.
In the Duplication mode, the CPT is again
reading from a pre-recorded tape in Station 2
and recording on Station 1 — but at a speed
of 400 characters per second, without reading
out through the typewriter.
In the following exercise, you will duplicate the tape created in Exercise 5.
EXERCISE 8 — Instructions
Follow the steps listed below:
(1) As in Read-Revise, the pre-recorded tape is inserted in Station 2 and the work tape in
Station 1.
(2) Depress Rewind 1 and Rewind 2.
(3) Turn on Read 2 and RECord.
(4) Depress the Page Control Key.
(5) Depress the Dup Key. The system will click once for each line duped until it has duped the
entire page.
(6) Re-enter the End of Page Code by holding down the Code Key on the console while depressing
the Stop Key on the typewriter. Record Search Code 02.
(7) Rewind both tapes and read the new tape in Station 1 to verify that it has duped correctly.
YOU MAY NOW REUSE THE TAPES CREATED IN EXERCISES 5 & 8.
43