30
ENTER TO ACCEPT
SET DEFAULT
ENTER TO SETUP
4.SET DEFAULT
↓
Ent
Esc
or
Ent
Figure 4-5 Clear or default setting
5.
Power Factor Setting
ENTER TO SETUP
5.PF SETTING
↓
Ent
Esc
or
Ent
ENTER TO ACCEPT
PF:LAG 0.99
↕
UP/DOWN TO CHANGE NUMBER,
ENTER to ACCEPT
DEFAULT PF=1.00
Figure 4-6 Adjust PF value
PF 1.00
: Current is in phase with voltage. This is default setting.
Leading PF
: Current is leading voltage in phase. This is also called
over-exc
ited condition or “capacitive”.
Lagging PF
: Current is lagging voltage in phase. This is also called
under-exc
ited condition or “inductive”.
Press the Up and Down key to change value of Power Factor. Press the
Enter key to accept Power Factor setting.
6.
Set LCD Interface Password
ENTER TO SETUP
6.PASSWORD
↓
Ent
Esc
or
Ent
ENTER TO ACCEPT
PASSWORD 0000
Default Password is 5678
Figure 4-7 Set password
