Mechanical Installation
12 / 27
Doc. No.: 9.0020.0589B0
3
Mechanical Installation
Unpacking for Inspection
Check the product for any obvious damages or if the items in the delivery list
are complete before performing installation. Contact your supplier immediately
if any problem is found.
The delivery list of the Combiner is as below:
No.
Images
Accessories
QTY (pcs)
1
AC Combiner
1
2
M12*50 screw
42
3
M12 nut
42
4
M12 Flat washer
84
5
M12 Spring washer
42
6
M4*12 comb. screw
6
7
Fixed bracket
2
8
One manual and one warranty
card, one certification
3
Table 3-1 Delivery list
Installation requirements
3.2.1 Environment requirements
Inflammable and explosive materials inside and around the inverter
are strictly prohibited
Good ventilation around the equipment shall be kept.
The temperature shall be kept within -30°C ~ +60°C. If the
environment temperature is more than 55°C, please choose
installation sites with shelters, or sunshades shall be built for outdoor
locations.
It is not recommended to expose the device directly to heavy rain, to
avoid water from entering the device through the cable entry hole in
the bottom in case that the water is very deep.
