PROGRAM INSTALLATION
8
•
Sub TONE : The matching of both frequency and sub-audio makes it possible to receive
after the stop of scanning.
•
Attack Time(Carrier) : It is the time for checking whether a suitable carrier exists or not.
•
Attack Time(Sub TONE) : It is the time for checking whether Sub-audio is matched or not.
•
Resume Time : It is the time for checking whether after Carrier or Sub-Tone is matched, or
RX is completed, the following signal exists or not without moving to the next channel.
•
Priority CH Sample Period : It is the interval for regular checking of priority channel when
during priority scanning, the scanning stops in a normal channel and when user wants to
check the call status during conversation.
☞
1) During scanning, if the Radio which is set up in Carrier Type receives No
Tone(matched) Carrier, the Audio is not opened and the status indication LED blinks in green
color during the Resume Time, which means the scanning will be started.
☞
2) If the Radio registered in scan list channels 1, 2, 3, 5, 7 receives an unwanted signal at
channel#3 during scanning, press “ENTER”key. Then, the channel#3 will be deleted from
the scan list.
If you want to return to the channel#3 in scan list,
①tur
n
turn on again after the power off.
②
turn on again after the scanning off.
