7
D
ATA
C
OLLECTOR
H
ANDHELD
U
SER
’
S
G
UIDE
Chapter 4: Getting Started
Use the following diagrams and information to familiarize yourself with the CPO
Science DataCollector.
Features of the DataCollector
Figure 3 shows the components of the DataCollector hardware.
Figure 3:
DataCollector Parts and Features
Connecting the Zire Handheld
To replace the handheld in the hardware, slide it on to the alignment pin and USB
connector, and then gently press the Zire handheld down until it snaps in place.
Avoid pressing any of the buttons.
To remove the Zire handheld from the DataCollector, gently pull back on the
spring clip until the handheld pops up. Then, gently slide it off the alignment pin
and USB connector.
