The isolator switch turns the electricity supply to the panel off.
Nothing will function whilst this switch is in the ‘Off’ position. To
operate the mixer, this switch must be turned clockwise to the
‘On’ position.
To completely isolate the panel the power supply
MUST
be
disconnected by removing the mains supply.
To start the mixer operating, simply depress the green ‘On’
button. The mixer shaft will then start to turn, the water valve will
open and the water pump will operate.
You can tell if the machine is operating by checking the shaft is
rotating clockwise in the face of the outlet and the motor fan is
turning. Water should be coming out of the outlet of the mixer.
The mixer is operated on a timer and will stop automatically. You
can also stop it at any time by depressing the red
‘Stop’
button.
The buttons are clearly marked as shown below.
PANEL ISOLATOR
MIXER START / STOP
SILO SETUP
6
Off
Start
Stop