CPAT FLEX (DSG1)
8
Figure 1: DSG1, rack mount brackets and AC/DC adapter
If any of the standard accessories are lost or damaged, you can order a replacement for the
DSG1. Please quote the following part numbers when placing an order:
Part No.
Accessory Description
(1) 5515
DSG1 AC/DC adapter
(2) 5516
DSG1 Operation Manual (this guide)
To place an order, please call Effigis at + 1 888-495-6577 or + 1 514-495-0018
3. Installation
This section describes how to install the DSG1. You may also refer to the installation diagram
at the end of this manual.
3.1 Mounting the DSG1 in an Equipment Rack
CAUTION!
Leave space for front, back and lateral ventilation.
3.2 Connecting RF Outputs
The RF outputs should be connected directly into the cable network’s RF forward combiners.
CAUTION!
In order to avoid unwanted interference with the QAMs in the cable network,
first set up the frequencies and output levels as described in section 4 before
connecting the RF outputs.
NOTE
Do not leave any RF outputs unterminated. If one of the outputs is not connected
to the network, put a 75 Ohms F terminator on the output.
1 2