CPAT FLEX (DSG1)
6
NOTE
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy, and if it is not installed
and used in accordance with the instruction manual, it may cause harmful
interference to radio communications. Operation of this equipment in a resi-
dential area is likely to cause harmful interference, in which case the user will
be required to correct the interference at his owns expense.
NOTE
Any modifications made to this device that are not approved by Effigis Geo-
Solutions Inc., may void the authority granted to the user by the FCC to operate
this equipment.
1.4 Technical Support
Effigis Technical Support Service is available from Monday through Friday from 9:00 AM to
5:00 PM Eastern Time.
Toll free from U.S. and Canada: + 1 888 495-6577
International: + 1 514 495-0018
Fax questions anytime to: + 1 514 495-4191
[email protected]
1.5 Calibration
Your DSG1 unit has been calibrated and tested in the factory, and does not need further
calibration before use.
However, if the unit suffers damage and needs repair, it is recommended that the unit be
returned to an authorized Effigis service center where it will be properly recalibrated.
If your company requires regular calibration of all equipment, or requires a calibration certifi-
cate for the DSG1, a calibration service is available through Effigis.
For more information on calibration services, please contact your Effigis representative.
1.6 Effigis Website
Effigis’ website contains product specifications, information, press releases, brochures,
downloads and Frequently Asked Questions (FAQs). Please visit our website at:
http://effigis.com