CPAT FLEX DRV3, Руководство пользователя

Страница: 31 / 44

effigis.com
31
User Manual
4. Operation and Maintenance
4.1 Reading the Measurement Mode Screen
The DRV3 starts up in measurement mode by default, and immediately detects and displays
levels for the last frequency selected. Unless the DRV3 has been set up for single band
detection, it simultaneously monitors the selected frequencies in the Mid band and the LTE
band.
In both modes, the top portion of the screen shows the same information, as follows, from
left to right:
Volume and docking status:
Shows reference volume level for audible alert upon detecting leaks that exceed squelch
criteria. Four (4) settings: mute, low, medium and high. See Sounds section to set up
reference level and squelch criteria.
When docked a truck icon will be displayed next to the speaker icon
Proximity factor and tag mode
Alternately display proximity factor setting (see section 3.2.4 Setting up Proximity on page
21) and selected tag mode (see section Using Channel Tag Detection on page 26)
Battery Charge Status:
Indicates charge (dark fill and percentage value) when operating on battery power, or shows
a plug symbol when the DRV3 is connected to a power source via the docking station or the
standalone AC converter.
The DRV3’s screen in measurement mode shows the following information: