CPAT FLEX DRV3, Руководство пользователя

Страница: 15 / 44

effigis.com
15
User Manual
Figure 6: Rear view of docking station
Figure 7: Rooftop antenna connexions
NOTE
The link with the DRV3’s tuners is made through the two small round connectors
on the front of docking station which align with the 2 holes protected by the
slider located at the back of the DRV3. The slider automatically opens when
docked. Do not insert any foreign objects into the sliders.
2.4.6 Speaker
The DRV3 is equipped with a speaker that emits an audio tone through the openings at
the rear of the unit to provide audio feedback of RF measurements. Most of the time, the
readings from both bands will be different. The audio tone will always reflect the highest
leakage measurement.
2.4.7 Battery
The DRV3 is powered by a Li-Ion 7.2 V 3.1Ah battery pack that has a 5-pin connector to
interface with the unit. Even though the battery pack may not be fully charged when the
DRV3 is shipped, your unit is ready to use out of the box. For information on charging the
battery, see section 4.4 Charging the Battery on page 33.
MID
LTE