Instruction manual CPL-40
11
of
19
TRANSPORTATION AND HANDLING.
Machine without pallet.
Due to its instability , the mixer must be handled with a suitably-sturdy strap, having it pass below
the head, as in the figure at the right.
Before lifting, stand the grid up vertically
§ Make sure the lift equipment is adequate for the load. Work in an empty area. During
movement, always keep the load as close to the ground as possible.
§
Use
the
required
P.P.E.
§ The mixer inclines slightly by 10-15 degrees when
lifted.
Lifting standards with lift truck: always use a pallet when handling the mixer.
Machine on pallet.
§ Make sure the lifting device is adequate for the load.
§ Widen the lifting forks as much as possible and make sure they come out from the
pallet.
§ Work in an area free from persons and
animals.
§ During movement, always keep the load as close to the ground as
possible.
§
Use
the
required
P.P.E.
STORAGE:
Storage of packed mixer:
The mixer must be stored in a closed and covered place, on a smooth and solid surface protected from dust
and filth, sheltered from atmospheric agents and hygienically safe.
The temperatures must remain between –20 and +50°C, and humidity no greater than 90%.
Storage of unpacked mixer.
If the mixer has already been unpacked, in addition to that above, it must be lifted from the ground with a
pallet or other and covered in order to protect it from humidity, dust and filth. If wrapped in cellophane or
another type of plastic, avoid airtight closing below the mixer in order to prevent corrosion linked to
condensate.
ATTENTION! The mixer must not be stored outdoor!!
