Ues and Care Manual
Wellness for Home
12/13
7.Heating:
•
Press this button to commence the heating function for the lumbar and seat region. A light will
indicate that the heating function is in operation. Press the button again to cease the function.
With the heating function in operation, should you wish to change the angle of the back rest or
leg rest, the heating function will pause and resume automatically once the back rest or leg
rest action is completed.
8.Vibration:
•
Press this button to activate the vibration function for the lower back and lumbar areas. The
vibration function operates in a sequence of ‘strong ’- ‘weak’ - ‘off’. Press the button
again to change the sequence. With the vibration function in operation, should you wish to
change the angle of the back rest or leg rest, the vibration function will pause and resume
automatically on the back rest or leg rest action is completed.
Automatic Timer
•
The chair is programmed to operate for a period of fifteen minutes, after which all functions will
stop and the chair will adopt an idle mode in its current position. To resume use of the chair
after this period, simply press your desired function button.
After Use
•
On conclusion of your massage program, please ensure that you return the back rest and foot
rest to their starting positions and turn off the power.
2.ZGR button:
•
On pressing the ZGR button the back rest, the foot rests and the seat are automatically
adjusted to preset reclining angles.
•
The reclining motion can be stopped by pressing either the ZGR button, the Back Rest
Recline/Restore button or the Leg Rest Raise/Restore button;
•
When the reclining motion is stopped by pressing either of these buttons and not the On/Off
button, you can resume the motion by pressing the button again;
•
After achieving the ZGR position, you may still adjust the angles of the backrest (incline only)
and footrest by pressing the relevant button;
3/4.Back Rest-Recline/Restore:
•
Press this button to activate the backrest and press again when the backrest is at your desired
angle. The angle of the seat will be changed automatically to accord with the angle of the
backrest. Movement of the back rest can be stopped by pressing the Back Rest Recline/Raise
button again or the ZGR button. When activating the backrest, the chair will not
simultaneously respond to the Leg rest Recline/Restore action, Heating and Vibration
functions.
5/6.Leg Rest-Raise/Restore:
•
Press this button to activate the Leg Rest-Raise/Restore action and press again when the leg
rest is at your desired angle. Movement of the leg rest can be stopped by pressing the Leg
Rest-Raise/Restore button again or the ZGR button. When activating the leg rest, the chair
will not respond simultaneously to Back Rest Recline/Restore action or the Heating and
Vibration functions.
