Ues and Care Manual
Wellness for Home
06/07
PLACE THE CHAIR
1. Lay a carpet, etc. on the set-up place.
It prevents damaging the foor, and mufes the noise during use.
2. Ensure there is sufcient space to allow the chair to recline.
In order not to touch the wall or other things when reclined, allow a clearance of 70cm(28" )
or more to the front and the back of the chair.
Notes
•
Place the chair on a level surface.
•
Keep the chair at least 1 meter(3ft) away from AV machines like a TV or radio.
•
Do not keep the chair in a place with high humidity like a bathroom.
•
Do not keep the chair in a place where it will be exposed to direct sunshine for an extended
period, or in a place near a heater where the temperature may reaches high levels.
CHAIR INSTALLATION
•
Step 1:
•
Unfold the backrest frame, fix the “L” shaped latch on the both sides, the attach then rear
fabric cover by Velcro;
•
Step 2:
•
Push the headrest frame forward, unzip the zipper of the back cover to the end, then pull up the
pad and put it onto the headrest frame.
•
And to ensure the pad set can be well addressed, without any damage, need your attention to
below notes:
•
As backrest pad is one peace from head to feet, before putting on the pad set, please check and
ensure the feet and seat part are already tightly attached;
•
Make sure the back cover is thoroughly unzipped before dressing the pad;
Don
'
t pull up too high and too strongly.
