CozyCab A-11241, Инструкция по монтажу, Страница: 5 / 29

June 2005
05-10386
Cab Installation (Continued)
2.10) From inside the cab, there are four holes located on the cab floor, used for securing the
cab to the frame of your unit. Match-Drill the holes, using a 7/16” diameter drill bit. Verify
there are no obstructions on the underside of the unit’s frame.
2.11)
Secure the floor of the cab to the unit using 4 bolts, 8 flat washers and 4 nylock nuts
(Items 1, 2 and 4 on mount kit drawing 4-14563). See figure 2-11.
Figure 2-11
2.12) The lifting brackets on top of the cab should now be removed and stored for future use if
needed. Check the rear adapter plates and adjust if needed. Tighten all bolts.
2.13) With the seat tipped forward, install the rear skirt from the inside using the 10-24 UNC
fasteners shipped with the mnt kit.
(Refer to item 15 on mount kit drawing 4-14563). See
figure 2-13
.
Figure 2-13
FLOOR FASTENERS
ITEMS 1 AND 2
10-24NC FASTENERS
REAR SKIRT ITEM 15
Page 5 of 29