07
The child restraint must not be used without the cover provided.
The seat cover should not be replaced with any other than the one recommended by the
manufacturer, because the cover constitutes an integral part of the restraint performance.
Your car seat must be positioned and installed properly so that, under normal vehicle
usage conditions, no part can become jammed under or between any moveable seat or in
the vehicle door.
If there is a interference between the adult safety-belt buckle and child restraint system, it
is an unsatisfactory position of the adult safety-belt buckle relative to the main load bearing
contact points on the restraint. You shall be advised to contact the child restraint
manufacturer if in doubt about this point.
Do not use any load bearing contact points other than those described in the instructions
and marked in the child restraint.
When you use this child restraint system at Group. I, and fix the seat by ISOFIX yoy must read the
car manufacturer's handbook.
