10
?1
9
10
11
12
13
5. Seat selection and adjustment
5.1 Adjusting the car seat
If the installation is restricted by the vehicle headrest then it
must be moved to the highest position or removed. (Fig. 9)
Adjust the seat to the right position, place it on the vehicle seat
forward facing and make sure the backrest of seat is firmly
pressed against the backrest of vehicle seat. (Fig. 10)
5.2 Seat for universal installation for (Group. 0+, II, III)
The child restraint system seat can be installed in vehicles
on any seat suitable for use in the listed vehicles fitted with 3
point with retractor safety-belts, approved to ECE Regulation
No. 16 or other equivalent standards. (Fig. 11)
And must not at any time be fitted using only a 2 point lap
belt. (When used in Group 0+ and Group II+III (Fig. 12).
If the car manufacturer allows child restraint systems on
the passenger seat, the seat should be moved to the position
furthest back. (Fig. 13)
WARNING: Airbags can cause injury. Do not use this
child seat on a passenger seat fitted with a frontal airbag.
We suggest always to install this child seat at the rear
seat of the vehicle. This will be safer for your child.
