Coyote Bandit, Руководство пользователя

Страница: 28 / 32

28 28
Start-up:
1. Add pucks to floating dispenser and open to setting 4.
2. Add 2 tablespoons (28 grams) of Arctic Pure
®
Refresh per 1000 litres (265 gallons) of water.
3. Add 1 tablespoon (14 grams) of Arctic Pure
®
Boost per 1000 litres (265 gallons) of water.
4. Test the Chlorine level. Once the chlorine reads within the ideal range (1-3 ppm) turn tablet
dispenser down to 1 - 2 (more or less according to bather load).
5. Start the Boost Filtration mode to to circulate the chemicals and do not use spa for two hours after
the mode ends.
Note: If your spa is NOT equipped with an ozone system, Chlorine levels should be 1-3 ppm. For
proper levels with ozonation, consult your Ozone System manual.
Weekly:
1. Add pucks to floating dispenser and reset if necessary.
2. Add 2 tablespoons (28 grams) of Arctic Pure
® Refresh per 1000 litres (265 gallons) of water.
3. Wait at least one hour and add 1 tablespoon (14 grams) of Arctic Pure
®
Best Defence per 1000
litres (265 gallons) of water.
Important: Arctic Pure
®
Refresh significantly reduces pH and TA. One hour after adding Arctic
Pure
®
Refresh test and adjust TA and pH as needed.
Bromine System:
Note: If you are planning to use your new spa right away, Peak Boost must be added first. Follow directions
for adding Peak Boost from this page.
1. Fill floating dispenser with pucks and open to setting 7.
2. Add 2 tablespoons (28 grams) of Arctic Pure
®
Refresh per 1000 litres (265 gallons) of water.
3. Add 2 1/2 tablespoons (35 grams) of Peak Boost™ per 1000 litres (265 gallons) of water, to
establish a Bromide reserve.
4. Test the Bromine level. Once bromine reads within the ideal range (3-5 ppm) turn tablet
dispenser down to 2 or 3 (more or less according to bather load).
Note: If your spa is not equipped with an ozone system, Bromine levels should be 3-5ppm. For sys-
tems with ozonation, consult your Ozone System manual.
Weekly
1. Twice a week test and adjust Total Alkalinity, pH and Chlorine or Bromine levels.
In extreme cases of sources water with high minerals (such as some well water), add
1 tablespoon (14 grams) per 1000 litres (265 gallons) of Arctic Pure
®
Best Defence weekly.
Important: Arctic Pure
®
Refresh significantly reduces pH and TA. One hour after adding Arctic
Pure
®
Refresh test and adjust TA and pH as needed.
The use of Clarifiers and Foam inhibitors is not recommended with Arctic Pure ®
Disposable filters!