EQ/OS 8.6 to EQ/OS 10.0 Configuration Converter
8. After clicking on
Run
the script is executed on Equalizer. If no errors occur and the script
runs to completion a
Configuration Complete
message will be displayed. If an error occurs the
a
Correct Error and Continue
screen will be displayed which is the same as the
Verify and Run Script
screen except that it opens at the line at which the error occurred as indicated by the error
message.
a. If you click on
Cancel
, the editor screen will be closed and you will be prompted
to
Save
your conversion script in the file store.Refer to the Equalizer
Administration Guide for instructions on accessing and editing files in the data
store using the CLI. Click on
Discard
to discard the script.
b. Click on
Continue
to execute the script on Equalizer starting at the line on which
the error occurred. If no errors occur and the script runs to completion, a
Configuration Complete
message will be displayed. If an error occurs, the
Correct
Error and Continue
screen will be displayed again and will open at the line at which
the error occurred as indicated by the error message.
9. After the script has completed running the new objects should appear on the left
navigational pane.
10
Copyright © 2015 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
