16
NOTE: The remote control always defaults to
the
CABLE
mode after all devices are turned
off. Therefore, the initial power-on sequence
will always be TV, DVD, and an auxiliary
device, if no other device key is pressed first.
Re-assIGnInG DeVICe KeYs
The Cox Universal Remote Control can be set up to
control a VCR or second TV, or any combination of up to
four home entertainment devices. For example, to have
the unit-control a TV, a Cable Converter, a DVD player
and a VCR, you will need to re-assign the unused
aUX
key to operate the VCR as follows:
1.
On the remote control, press
aUX
once.
Then press and hold
seTUP
until the
aUX
key
blinks twice, then release
seTUP
.
2.
Enter
9 - 9 - 2
. The
aUX
key will blink twice.
3.
Press
aUX
once. The
aUX
key will blink
twice.
4.
The
aUX
key is now ready to be programmed
for your VCR. See
Programming Device
Control
on page 9.
To re-assign other device keys, repeat steps 1–4 and
substitute the key sequence using the following chart:
To Re-assign
Perform Key sequence
TV
as 2nd DVD key
seTUP
-
9
-
9
-
2
-
DVD
-
TV
TV
as 2nd Auxiliary key
seTUP
-
9
-
9
-
2
-
aUX
-
TV
TV
as 2nd Cable key
seTUP - 9 - 9 - 2 - Cable -TV
TV
back to
TV
seTUP - 9 - 9 - 2 - TV - TV
DVD
as 2nd TV key
seTUP - 9 - 9 - 2 - TV - DVD
DVD
as 2nd Auxiliary key
seTUP - 9 - 9 - 2 - aUX - DVD
DVD
as 2nd Cable key
seTUP - 9 - 9 - 2 - Cbl- DVD
DVD
back to
DVD
seTUP - 9 - 9 - 2 - DVD -DVD
aUX
as 2nd TV key
seTUP - 9 - 9 - 2 - TV - aUX
aUX
as 2nd VCR key
seTUP - 9 - 9 - 2 - DVD - aUX
aUX
as 2nd Cable key
seTUP - 9 - 9 - 2 - Cbl - aUX
aUX
back to
aUX
seTUP - 9 - 9 - 2 - aUX - aUX
Upon completion of a re-assignment, the selected
M7820BP1.indd 16
3/13/2007 3:54:01 PM
