11
Combo and press
POWER
once. The device
should turn off. If it does not respond, repeat
steps 2-3, trying each code listed for your brand
until you find one that works. If it still does not
work, try searching for the code (see
Searching
For Your Code
on page 12).
5.
If you’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate
TV code is also listed, you’ll need to program
this code into the remote control to access
volume control (see
Programming Device
Control
on page 9).
If there is no separate TV code listed, you will
need to perform the following steps to access
volume control:
a. Press and hold
SETUP
until the
DVD
key
blinks twice, then release
seTUP
.
b. Enter
9 - 9 - 3 .
The
DVD
key will blink
twice.
c. Press
DVD
once. The
DVD
key will blink
twice.
6.
For future reference, write down each work-
ing device code in the boxes below:
TV/VCR
TV (if used)
M7820BP1.indd 11
3/13/2007 3:54:00 PM
