COX A20318L, Руководство пользователя

Страница: 8 / 90

Page 8 December 2018 OWNERS MANUAL FOR MODEL A20318L
PRE-DELIVERY INSTRUCTIONS
Unpacking Instructions
Inspect the shipping crate and contents for
damage.
Position the shipping crate on a firm flat level
surface with at least 3 meters distance from any
obstruction to the end of the crate adjacent to
the front of the tractor.
! Caution you can be seriously injured
by the metal strapping which has sharp
edges and can spring out when cut.
Wear gloves when handling metal
strapping.
! Caution you can be seriously injured
by sharp nails protruding from the
shipping crate.
Cut and remove the straps restraining the
tractor to the ends of the shipping crate.
Remove the end of the shipping crate adjacent
to front of the tractor.
Remove the plastic sheet covering the tractor.
Unlock the park brake by lowering the knob to
the off position.
Pull the tractor from the shipping crate. Depress
the brake pedal to stop travel. Once stopped
the park brake should be locked on by raising
the knob to the on position.
Remove the steering wheel, seat sub-assy, &
other loose components from the packaging.
Dispose of all packaging material
responsibly.
Do not leave the plastic sheet unrestrained,
it can blow away to become a safety hazard.
UNPACKING INSTRUCTIONS
INTRODUCTION:
The purpose of this procedure is to ensure
the dealer/distributor has assembled & made
the necessary checks, & adjustments, before
the mower is operational, and instructed the
owner in its safe operation & maintenance.
This procedure begins upon receiving the
crated mower and is finalised once the
mower has been either sold or leaves the
dealer/distributors premises. This is the
minimum amount of work required, however
it should not be limited to only the areas
detailed in this procedure.
RESPONSIBILITY:
It is the responsibility of the dealer/
distributors to ensure that before a mower is
delivered to a customer, it is in perfect
operational condition.
PROCEDURE:
UNCRATE THE MOWER
CHECK COMPONENTS SUPPLIED IN
SEAT PROTECTION BAG

Engine owners manual

Owner/Operator manual

Ignition keys (AM015)

Washer,Lock,Spring (WS050216) x 1

Set Screws M8X20 (SH0820M) x 3

Nuts M8 Nyloc (NM8NT) x 2

Seat Springs x 2 (A163060)

Spring Caps x 2 (A160231)

Washer (W05M202) x 2

Cap, Str Inc Badge (A203298) x 1

Seat Washer (WSEAT08X27X3) x 1

Screw, Cap M5X25 x 6

Pre-delivery Instruction Sheet
ASSEMBLY:
TOOLS & EQUIPMENT REQUIRED:
Socket set containing 13mm a/f socket &
extension 75mm (3”) or longer. Spanner 13mm
a/f., 1/2” a/f hex key.
Refer pictorial procedure
provided.
STEERING WHEEL
To attach the steering wheel, insert the
wheel onto the steering shaft ensuring the
flats machined on the shaft engage with the
ones in the steering wheel. Secure the wheel
to the shaft with 5/16 UNC bolt and spring
lock washer included with the machines tool
kit. Lastly secure the centre badge and bezel
with the 6 cap screws included with the
machines tool kit.
HOURMETER
The PowerBOSS hourmeter included with the
machine has an internal battery designed to last
for the warranty period of the machine. It does
not need to have power connected to it. Your
dealers will program the hourmeter with service
reminders as per the servicing periods outlined
in this manual.
SEAT MOUNT & SEAT SPRINGS
Install the two seat springs using the screws,
washers, nuts, to the seat slide frame, and
tighten the screws, washers, and nuts.
Install the Seat & Mounting to the seat slide
frame using the Screws and Nuts. Attach
seat switch wiring to seat switch.
CHECK TYRE PRESSURES & FLUID
LEVELS:
TYRES
Before operation ensure that tyre pressures
are equal on both sides. Uneven pressure
can give an uneven finish when mowing and
may cause damage to tyres and/or tubes.
The recommended pressure is:
Front 170kPa
(24 P.S.I.).
Rear 140kPa
(20 P.S.I.)
BATTERY
This machine is fitted with a maintenance free
battery. Ensure battery indicator is green.
ENGINE OIL
Before operation ensure that engine oil level
is to the full mark on the dipstick. (Refer
engine owners manual for procedure & if oil
needs to be added refer Engine Owners
Manual for Correct Grade).
FUEL
Ensure there is fuel above the fuel tap & the
fuel tap at the bottom left front
side of fuel
tank is turned to the on position before
attempting to start engine. (Use unleaded
fuel only).
Turn off fuel tap after use.
CHECK OPERATION OF SAFETY
SWITCHES:
STARTING
Foot Switch
-
With the PTO (power take
off) switch in disengaged position (off),
attempt to start the engine without
depressing the foot switch.
Engine should not start.
PTO Switch -
While sitting on seat with
foot on foot switch and PTO switch in up
(engaged) position, attempt to start the
engine.
Engine should not start.
Key Switch
With PTO switch in down (disengaged/off)
position & foot switch depressed turn key
switch to start position.
Engine should start.
STOPPING
Seat Switch -
While sitting on seat with
engine running, engage cutter, and lift
weight from seat.
Engine should stop.
Key Switch
Sit on seat and start engine, turn key switch
to stop position.
Engine should stop.