mono160
CowboyStudio FA160B Flash Lighting Kit Use Instructions
Safety Precautions
1.
Before using the light, make sure that the electrical outlet of your local power supplier matches the
power regulation indicated on your lighting equipment.
2.
Do not use any power supply other than the AC specification indicated on your equipment.
3.
Do not expose your lighting equipment to sunshine, moisture, dust, dirt, rain, or water.
4.
Any exposure to chemical solutions, gasoline, grease, oil, paint, or detergents can result in
permanent damage to your equipment.
5.
Do not insert metal parts into any lighting equipment.
6.
Dry your hands before handling the equipment, as touching your equipment with wet hands is
dangerous to both of the equipment and to you.
7.
Do not keep the power on when the light is not in use.
8.
Do not attempt to repair your lighting equipment without the companion of the well trained
technician.
Tips for Use
1.
To keep the internal surface of the reflector clean, wipe off the dust with a soft cloth after turning
the power off.
2.
Turn the power off and store your equipment in a dry place when it is not in use.
Introduction
MT-160 is a quality strobe light with an exceptional value for commercial studios, location
photographers, photo schools, students and amateurs as well. The MT-160 not only contains all of the
fundamental features. Designs for MT-160 (i.e. color-temperature corrected circle flash-tube, fixed
reflector and power cable, remote sensor/slave, built-in umbrella holder, and angle-adjustable fixture),
but also includes some professional functions such as continuous power adjustor with fine-setting
clutches, dual-locking stand adapter. It features with stable color temperature (5600K), large
lighting-coverage and even lighting effect.
Specification
Power Input: AC220 volt,
50/60Hz
Flash Power: 160ws (joule) in full
Recharge Time: 0.5-3
seconds in full.
Flash-tube Lifetime: over 8,000 typical flashing
Fuse: 5A
Power Setting: 1/16 to full
continuously
Color Temperature: 5600K
Guide No.: 120ft/36m
ISO100
Flashing Duration: 1/600 sec. @t=0.1; 1/1000 sec. @t=0.5
Slave Effectiveness: 10m;
35ft
Lighting Range: 55
degree
Modeling Power: Halogen 75w
Bulb Base: E-14 screw
Synch Voltage: 6volt
Dimension:
φ
4"×7-1/2"(
φ
100mm×195mm)
Weight: 1.8Lb (800g)
