Coway CHP-250L, Руководство пользователя, Страница: 12 / 52

INSTALLATION TIPS
• Open the feed water supply valve.
The feed water must be supplied to operate the water filtration device normally.
• After installing the product
Get rid of the saved water above the full water in the inner water tank 2 times or more to use.
• When the indicator in the indication part is turned off
When the indicator in the indication part is turned off, check if the power supply was stopped
due to the power failure or other cause.
• Regular filter replacement
If the filter is not regularly replaced, it may degrade the water quality from the product. The filter
replacement cycle depending on the feed water quality can be shortened rather than expected
replacement cycle.
• When you did not use the product for a long time
If the water has been stored inside water tank for a long time, drain the water inside. Flush newly
purified water before use.
• Check up before product storage for a long time
Close the feed water valve and unplug the power cord.
Connect the power plug to the electrical outlet before operating the
product.
220 - 240 V~ 50 Hz