Coway CHP-240N, Руководство пользователя

Страница: 11 / 20

For initial use
To activate the cold water function, tap the cold
button on the front panel for two seconds. The
cold water temperature indicator lights up.
Tap the cold button. Then, set the desired quantity
of water (120 cc
→
250 cc
→
500 cc
→
continuous
dispensing) by tapping quantity button.
Tap the dispense button to dispense cold water.
Tap the hot button. Then, set the desired
quantity of water (120 cc
→
250 cc
→
500 cc
→
continuous dispensing) by tapping
quantity button.
Tap the dispense button to dispense hot water.
Set the desired dispensing water temperature.
In the 120 cc dispensing mode, tap the quantity
button 3 times( )
(250 cc mode: 1 time, 500 cc: 2 times).
Check whether the quantity indicator is lit on.
Tap the dispense button to dispense water.
The water can be dispensed continuously for 3
minutes at maximum.
Press the quantity button for 5 seconds, then
tab the quantity button to set the desired preset
quantity. The chosen quantity icon blinks and the
chosen quantity of water will be dispensed when
you tap the dispense button.
If you press the quantity button again for 5 seconds
or no other button is pressed, the preset quantity
dispensing mode is automatically deactivated.
3 min.
5 seconds
To drink cold water
To drink hot water
For continuous dispensing ambient/cold/hot water
For preset quantity dispensing ambient/cold/hot water
INST
ALL
ATION / HO
W
TO USE
H
ow t
o U
se
10
9
- When initially using the product, it takes about 2 hours for the water to be adequately
chilled.
- Take caution when dispensing hot water to avoid scalding.
- In initial use of the product, dispense 1 cup of hot water. The product heats the water
directly, so it takes a while to heat the water (hot water temperature : 25 ºC (0.5 L/min),
waiting time: 4 seconds).
Tips
Tips