Coway BA16-CE, Руководство пользователя

Страница: 20 / 88

1
2
1. Remove the mounting bolts to detach the existing toilet seat and seat cover.
1
2
1. Close the tap water supply valve. Then unscrew and remove the existing toilet tank
hose.
3. Fix the MF filter onto filter fixing stopper shown as image.
- Tighten the filter. If not, the bidet may not operate properly.
INSTALLATION
Be sure to connect the product to a cold tap water pipe. If the product is connected to a hot water
pipe, the filter and hose of the product may be damaged.
Caution
2. Connect the T-shaped connector to the tap water supply valve along with the
rubber washer.
- Connect the removed toilet tank hose to the T-shaped connector.
- Connect the bidet hose to the T-shaped connector firmly.
Remove existing toilet seat
Install the product
▶
Keep the removed toilet seat in a dark place to protect it from damage by direct sunlight.
▶ Do not splash the water directly onto the product.
▶
A small amount of water used for the shipping inspection at the factory may remain in the
MF filter of the product, this is not a defect.
Tips
Tips