Coway AP-1512HH, Руководство пользователя

Страница: 15 / 48

How to use
How to adjust the sensitivity of the particle sensor
When the product is shipped out, the air quality sensor is set to standard sensitivity. If the pollution
level stays at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour
when the air does not seem clean, users can adjust the sensitivity of the air quality sensor as follows.
1. While the air purifier is on, press the airflow speed button and
ionizer button for 2 seconds.
2. The speed indicator will flash at 1.0 second intervals with beep. The
speed indicator blinks to show the sensor sensitivity.
3. Adjust the sensitivity by pressing the speed button.
The speed indicator blinks to show the sensor sensitivity.
Speed step 1 Speed step 2 Speed step 3
Sensitive Standard Insensitive
＊ High sensitivity: If the air purifier indicates a pollution level of 1 for
longer than one hour when the actual pollution level is
higher.
＊ Low sensitivity: If the air purifier continues to indicate the highest
pollution level even after running the air purifier for
more than two hours.
4. Press the airflow speed button and ionizer button for 2 seconds.
The air purifier will then resume normal operations.
＊ The new setting will also be applied if no button is input for 10 seconds.
2 seconds 2 seconds
2 seconds 2 seconds
Flash Flash
ADJUST AIR QUALITY SENSOR
ENGLISH / 14