Coway AP-1018F, Руководство пользователя

Страница: 15 / 44

14
13
H
ow t
o U
se
H
O
W T
O
U
SE
/ ADJUST P
AR
TICLE SENSOR
When you first turn on the purifier, the air quality sensor is set to standard. You can adjust the
sensitivity as follows if the air quality LED stays at severe even after the purifier runs for 2 hours or
more with high pollution or the air quality LED stays at clean even if the pollution is high.
How to adjust the sensitivity of the pollution sensor
ADJUST PARTICLE SENSOR
1 sec. 1 sec.
3 sec. 3 sec.
1. Press and hold the air speed button and mode
button simultaneously for about 1 second while
the purifier is running.
2. The air speed mode indicator flashes at intervals of
about 0.5 seconds.
4. Press the air speed and mode buttons simultaneously
for at least 3 seconds again to enter your selected
sensitivity to operate the purifier normally.
∗
If the air speed button and mode button are not pressed for
10 seconds after selecting sensitivity, the selected sensitivity is
automatically input.
3. Press the air speed button to adjust to your desired
sensor sensitivity. When sensor sensitivity is selected,
the air speed mode indicator flashes as follows.
Silence Level 1 Level 2
Sensitive Standard Insensitive