Verpakkingsinhoud
3
Troubleshooting
12
If the display fails to respond with a known smoker being tested then a fault has
occurred with the sensor and the user should contact Bedfont Scientific or their
local representative.
If the display shows:
! V BATT V !
This indicates that the batteries are low and should be replaced immediately to
prevent damage to the unit. If problems still occur, the unit should be returned to
Bedfont or their local representative for checking.
It is possible to display the firmware version and language setting of the unit.
Switch on the monitor with the Zero button held in and the unit will display:
INTERNATIONAL
FIRMWARE X.XX
The LEDs will also slowly flash in sequence to indicate they are working. Release
the Zero button and the unit will continue to start up normally.
1
2
5
4
6
3
7
1. Micro 4 Smokerlyzer® meter
2. T-stuk testsysteem
3. Kartonnen wegwerpbare mondstukken (x3)
4. Schroevendraaier voor ijking
5. Batterij
6. Handleiding
7. Draagkoffer
®
Micro 4 Smokerlyzer
ENGLISH
Handleiding uitgave 5 - 02/06