Covidien Nellcor, Руководство оператора

Страница: 14 / 120

Introduction
4 Operator’s Manual

WARNING:
Any connections between this monitoring system and other devices must
comply with applicable medical systems safety standards such as IEC 60601-1.
Failure to do so could result in unsafe leakage current and grounding
conditions.

WARNING:
Do not silence or decrease the volume of the audible alarm if patient safety
could be compromised.

WARNING:
Do not preset different alarm limits for the same or similar equipment within
a single area.
1.2.3
Cautions

Caution:
The monitoring system may not operate properly if it is operated or stored at
conditions outside the ranges stated in this manual, or if it is subjected to
excessive shock or dropping.

Caution:
Do not spray, pour, or spill any liquid on the monitoring system, its
accessories, connectors, switches, or openings in the chassis, since this may
cause damage to the monitoring system. Never place fluids on the monitoring
system. If fluid spills on the monitoring system, remove batteries, wipe dry
immediately, and have it serviced to ensure no hazard exists.

Caution:
Accessory equipment connected to the monitoring system's data interface
must be certified according to IEC Standard 60950-1 for data-processing
equipment. All combinations of equipment must be in compliance with IEC
Standard 60601-1:2005 Requirements for Medical Electrical Systems. Anyone
who connects additional equipment to the signal input or signal output port
configures a medical system and is therefore responsible for ensuring the
system complies with the requirements of IEC Standard 60601-1:2005 and IEC
Standard 60601-1-2:2007.