Covert Extreme
4 Advanced Operations
Page 11
Press
MENU
to cancel setting and return to info display.
4.1.10
Set Timer Triggering Interval (TLV version only)
This TLV version is equipped with a timer function meaning the camera will
capture images or videos at preset time intervals regardless of whether there are
motions to detect or not. The default parameter is
OFF
which means the timer
function is disabled. When changing this parameter to a non-zero value, it starts to
take photos at the given time interval. The value ranges from 10 seconds to 8 hours.
Press
“
◄
”
and
“►”
to decreases or increases the value.
The following shows how to set timer interval to
1 hour
provided that the
previous value is
OFF
.
e)
Press
MENU
to display the setting menu.
f)
Press
“▲”
or
“▼”
to select
Timer
Interval
.
g)
Press
“►”
to decrease or increase to
1 hour
.
h)
Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.11
Set Timer Switch
This parameter defines a certain time lapse in a day when the Camera can be
triggered. In the rest of the time the device is shut off. The effective value of the hour
ranges from 0 to 23 while the minute ranges from 0 to 59. Timer Switch OFF means
the camera works all the time; Timer switch ON means the camera works only
during the time lapse according to the preset settings.
Please note that the Timer switch functions only when the timer is set as
On
.
Provided that the camera works from 08:00 a.m. to 17:00 p.m., the steps are as
following:
a)
Press
MENU
to display the setting menu.
b)
Press
“▲”
or
“▼”
to select
Timer Switch
.
c)
Press
“►”
to select
On
.
d)
Press
OK
to enter into submenu.
e)
Press
“►”
to select item, press
“▲”
or
“▼”
to change the value until the
start time changes to 8 and the stop time changes to 17.
f)
Press
OK
to save all current setting and the option will be un-highlighted.
Press
MENU
to return to previous menu.
4.1.12
Set Flash Range
This parameter defines the IR lights distance. The camera provides two options
15m
and
8m
. If set at 15m, all 40 of the IR lights work to get a long IR distance. If set
at 8m, the IR range will be shorter, and only the 3 middle horizontal rows of IR lights
work to save the power consumption.
The following shows how to set flash range as
8m
provided that the previous
option is
15m
.
a)
Press
MENU
to display the setting menu.
b)
Press
“▲”
or
“▼”
to select
Flash Range
.
c)
Press
“►”
to select
8m
.
