Covert Extreme
4 Advanced Operations
Page 10
This parameter is effective and can be adjusted only when the device in the video
mode for the LIVE mode. Its value extends from 1 to 60 seconds with a step of one
second. The default value is 10 seconds. Press
“
◄
”
and
“►”
to decrease or increase the
value by 1 second.
The following shows how to set video length to
15 Seconds
provided that the
previous value is
1 Second
:
a)
Press
MENU
to display the setting menu.
b)
Press
“▲”
or
“▼”
to select
Video Length
.
c)
Press
“►”
to increase to
15 Seconds
.
d)
Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to exit.
4.1.8
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are four parameters:
High, Normal, Low
and
PIR off.
The default value is “Normal”. The higher degree
indicates that the
Camera
is more easily to be triggered by motion, taking more
pictures or recording more videos. It is recommended to use high sensitivity degree
in room or environment with little interference, and to use lower sensitivity for
outdoor or environment with lots of interference like hot wind, smoke, near window
The sensitivity of the PIR is strongly related to the temperature. Higher temperature
leads to lower sensitivity. Therefore we recommend the
High
setting for
temperatures exceeding 95 degrees Fahrenheit. Use the
Low
setting for temperatures
below 35 degrees Fahrenheit to reduce false triggers. For normal use of the camera,
the
Normal
mode is recommended and is the default setting.
The following shows how to set the PIR sensitivity as
Low
provided that the
previous option is
Normal
.
a)
Press
MENU
to display the setting menu.
b)
Press
“▲”
or
“▼”
to select
Sensitivity
.
c)
Press
“►”
to select
Low
.
d)
Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to return to info display.
4.1.9
Set PIR Triggering Interval
This parameter means that how long the PIR (Passive Infrared motion sensor)
will be disabled after each triggering in ON mode. During this time the PIR of the
device will not react to the motion of human (or animals). The minimum interval is 0
seconds meaning the PIR works all the time. The maximum interval is 1 hour,
meaning the PIR will be disabled for 1 hour after each triggering. The default value
is 1 minute. Press “
◄
” and “►” to decreases or increases the value.
The following shows how to set triggering interval time to
5 Minutes
provided
that the previous value is
1 Minute
.
a)
Press
MENU
to display the setting menu.
b)
Press
“▲”
or
“▼”
to select
PIR
Interval
.
c)
Press
“►”
to decrease or increase to
5 Minutes
.
d)
Press
OK
to save the current setting and the option will be un-highlighted.
