Page 8
For technical questions, please call 1-888-866-5797.
Item 63297
Attach Front and Back Covers
1. Position Front Cover (20) so that zipper
pulls are facing toward the outside.
Make sure zippers are closed.
2. From inside, remove Center Top Rail, then line up
top opening on cover with 3-Way Connector. Wrap
Cover over tubes so that Strap is under Connector.
3. Replace Center Top Rail.
4. Repeat with other two Top Rails.
5
Center
Top Rail
Top
Rail
Top
Rail
Inside
Straps
5. Thread Strap through Ratchet Tie Down’s (22)
spindle. Repeat on other side.
Strap
Spindle
Ratchet Tie
Down (22)
6. Hook Ratchet Tie Downs into Corner Feet. Raise
and lower the handles to tighten straps, alternating
between left and right Feet, until straps are snug.
7. Repeat for Back Cover (21).
SAFETY
MAINTENANCE
ASSEMBL
Y