6. Press
/
button until “PRIO#1?” or “PRIO#2?”.
7. Press
O
button to select the type of the required priority channel.
For example, in Step 7, the type of priority channel is “DES?”.
Press
/
button to select the required priority channel.
8. Press
O
button to complete operation.
9. Press
C
button to return to the previous operation.
10. OST
In a certain specific channel, you can revise the CTCSS/DCS encode/decode setup of
current channel.
The operating steps go as follows:
A. Press the “OST” button to enter the OST menu mode.
B. Press
/
button until the CTCSS/DCS encode/decode you want.
C. Press
O
button to select.
Note:
¾
When the OST backup function is enabled, the radio retains the OST code of
each channel even if the channel is changed or the radio is shut down
¾
In the OST state, P2“·”icon will display.
¾
Press “OST” button again to return to normal operation.
11. GPS Information View
If the radio starts the GPS function, you can view the current GPS information. The
specific operating steps go as follows:
A. Press “GPS Information View” button to enter the GPS information display mode.
B. Press
/
button until the items you require displays.
C. Press
O
button for selection.
D. Press
/
button for page up of the following content.
E. Press
C
button to return to the previous operation.
The specific content can be shown as follows:
1. Positioning star number: “STAR NUM”
2. Longitude “LONGITUD”
3. Latitude “LATITUDE”
4. Altitude “ALTITUDE”
5. Speed “SPEED”
6. Time
“TIME”
■
VOX (Voice Operated Transmission)
VOX allows hands-free transmission on the radio when using the appropriate earphone/headset.
