NOTICE CVGL EN-FR (v01-2021)
page 16 sur 44
ZA des Petits-Champs
26120 Montélier.
France
13. MAINTENANCE :
13.1 FREQUENCY :
Determination of the maintenance frequency according to the rates,the environment and the type of load.
=> To be defined by the user.
13.2
ASSEMBLY / DISASSEMBLY OF GRIPPING INTERFACE:
2 possibilities for maintenance:
Replacement of only the foam or suction cups or replacement of the complete gripping interface.
Removal of the interface:
2 mounting versions available:
Screwed gripping interface:
The interface are screwed to the aluminium profile of the vacuum gripper.
Note: for vacuum gripper with foam, it is necessary to remove the foam to access the screws
.
Clip-on gripping interface:
CVGL version _ _ _ C
Solution for quick assembly/disassembly of the gripping interface, with spring blade clips.
Number of clips according to the length of the vacuum gripper:
•
CVGL424 : 6 clips
•
CVGL624 : 8 clips
•
CVGL824 : 10 clips
13.3 PROCEDURE FOR REPLACING THE GRIPPING FOAM :
1. Manually remove the used FOAM
interface.
2. Clean the plate with a chemical degreaser
(e.g.NECTRAL) to remove unwanted
compounds (adhesive residue, grease...).
3. On the replacement foam, rub the
protective film on the adhesive side for a
few seconds to activate the cells and
promote bonding.
4. Remove the protective film.
Operating Instructions
CVGL Series, Vacuum Grippers
