PAGE 4 OF 9
FIGURE 2
14
#13 BOLT M6*14
14
#13 BOLT M6*14
FIGURE 4
FIGURE 5
Step 2:
Place both ends of the cross brace (#4) on top of the
bottom tabs on the right and left frames (#2 and #3).
Fasten them together by using bolts (#13) and washers
(#15). Completely tighten all of the bolts. See Figure 2.
Step 3:
Fasten the tank support assembly (#7) to the front door
(#5) by using bolts (#13) and washers (#15). Insert the
tank fastener (#8) into the tabs on the front door (#5)
and fasten them together by using washers (#15) and
nuts (#16). See Figure 3.
Note:
The wheels attached on the tank support assembly
(#7) should be facing towards the outside.
Step 4:
Fasten the lower connector (#9) to the corner of the
bottom rim on the left frame (#3) by using bolt (#13)
and washer (#15). Then, insert the front door (#5) into
the connector tab on the lower connector (#9).
See Figure 4.
Note:
The lower connector (#9) is marked with an “E”.
Step 5:
Insert the upper connector (#10) marked “F” into the
top holes in the front door (#5). Fasten the upper
connector (#10) to the left frame (#3) by using bolt
(#13) and washer (#15). See Figure 5.
3
4
3
13
15
18
4
2
3
5
3
3
5
9
3
5
14
#13 BOLT M6*14
Note:
The labeled arrow marks on the cross brace (#4) should
coincide with Figure 2 to ensure proper assembly.
A
FIGURE 3
14
#13 BOLT M6*14
8
7
16
8
18
13
The tab
15
5
15
13
18
9
13 15
18
13
5
5
10
18
Note:
1) Close the front door to ensure proper
assembly. See Illustration A.
2) When moving the appliance, make sure
that the front door is closed.
3) Slide out the fastener when you open
the door.
15
15
10
