Step 3:
Fasten the lateral cross braces (#4) to the
upright supports (#2 and #3) by using bolts
(#18), washers (#26), and plastic nuts (#29).
Repeat the same procedure for both sides.
See Fig. A – Step 3.
Step 5:
Insert the leg caps (#16) into all of the base feet.
See Fig. A – Step 5.
PAGE 3 OF 8
Step 1
Step 2
Step 3
Step 4
Step 5
Fig. A
Step 1:
Fasten the front and rear upright supports (#2
and #3) at the top by using bolts (#17), washers
(#25), and steel nuts (#28). Repeat the same
procedure for both sides. Keep the bolts loose.
See Fig. A – Step 1.
Do not tighten the bolts
after step 1, fasten all of
the bolts after step 5.
Step 2:
At both ends, insert the assembled upright
supports (#2 and #3) into the top cross beam
w/adjustable teeth (#1). Tighten all of the nuts
and bolts now. See Fig. A – Step 2.
Step 4:
Fasten the rear cross brace (#5) to the rear
upright supports (#3) by using bolts (#18),
washers (#26), and plastic nuts (#29). Tighten
all of the nuts and bolts. See Fig. A – Step 4.
STOP DON’T RETURN TO STORE!
17
34
34
25
25
25
25
17
18
35
26
26
29
18
35
16
16
16
16
26
26
29
2
2
2
3
2
3
3
3
3
3
3
2
2
3
2
4
5
4
3
1
ASSEMBLY (Note: When fastening with nuts
and bolts
,
always use a washer (#25, #26, or #27)
between the tube and the bolt or the tube and
the nut.)
28
28
