Fig. G
Step 13:
Slide the canopy/frame connectors (#30) onto
the canopy (#35). Fasten them together by
using screws (#27). Make sure that the teeth
of the canopy/frame connectors are facing
towards the inside of the frame.
See Fig. G – Step 1 and Step 2.
30
35
35
Step 1
Step 2
27
27
V-3
13
11 11
11
11
13
Warning:
Make sure that both ends of the suspension
springs (#13) go completely through the
holes in the angled braces of the top cross
beam w/adjustable teeth (#1) and the swing
arm tubes (#11).
13
13
13
1
13
Fig. E
Fig. F
PAGE 6 OF 8
Step 11:
Hook the suspension spring (#13) into the
top of both swing arm tubes (#11). Repeat the
same procedure for both sides. See Fig. E.
Step 12:
Hang the other side of the suspension spring
(#13) into the hole located in the angled brace
of the top cross beam w/adjustable teeth (#1).
Repeat the same procedure for both sides.
See Fig. F.
STOP
DO NOT RETURN TO THE STORE!
13
13
