background image

PAGE 7 OF 7

STOP    

DON’T RETURN TO STORE!

Cleaning and Maintenance

• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use 

  bleach, acid, or other solvents on the frame or fabric.

• The cushions and canopy may be surface 

washed with mild soap and water if necessary. Commercial foaming 

  upholstery cleaner may also be used. Rinse well and hang to dry. Do not machine wash or dry.

• We recommend the use of furniture covers to protect your swing when not in use.

• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of 

  your swing.

• In order to prolong the life and beauty of your 

swing, we recommend that the cushions and fabric parts be

  stored in a dry and protected area during off season periods (i.e. overnight or on rainy days).

Special Warnings

• The user of this swing should always inspect it before each use. 

• 

It is essential to place this swing on level ground and not less than 6 feet from any obstruction; such as fences, 

  garages, houses, overhanging branches,laundry lines, or electrical wires.

• Check the tightness of all of the nuts and bolts on a regular basis.

• Make sure that the suspension springs are properly secured before each use.

• Always remove the canopy in heavy wind conditions; otherwise, the canopy may tip over and cause damage to

  its parts.

• The manufacturer will not accept responsibility for unauthorized repairs or modifications to the swing or its 

  parts.

• Oil all of the metal parts that move regularly.

• Weight limit is 500lbs.

The store where you made your purchase

does not stock parts for this item.  

If you need parts,

whether they are missing or damaged, 

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

Call Toll  Free:

TEL: 1-877-539-7436
FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU 
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE 
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME 
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS 
   LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS 
PRODUCT TO THE RETAILER.    

 

Содержание RUS426K-WM








Отзывы: