Step 9:
Hook the suspension spring (#22) to the
top of the swing arm tubes (#10) and do
the same for the other side. See Fig. G.
Step 10:
Hang the other side of suspension
spring (#22) into the hole of each side on
the angled braces of the top cross beam
w/adjustable teeth (#1). Do the same for
the other side. See Fig. H.
Fig. I
Fig. H
Fig. G
PAGE 5 OF 6
STOP
DON’T RETURN TO STORE!
Step 1
Step 2
28
28
23
15
15
10
10
1
1
22
22
22
22
22
22
22
10
10
Step 11:
Slide the canopy/frame connectors (#23)
into the canopy (#28). Fasten them
together by using screws (#15) in the
pre-drilled holes. Make sure that the teeth
of the canopy/frame connectors are facing
toward the inside of the frame.
See Fig. I - Step 1 and Step 2.
Warning:
Make sure that both ends of the suspension
springs (#22) go completely through the
holes in the angled braces on the top cross
beam w/adjustable teeth (#1) and the swing
arm tubes (#10).
