STOP
DON’T RETURN TO STORE!
Assembly(Note: For all nut and bolt
fastening, always use a washer
(#16 and #17) between the tube and bolt
or the tube and nut).
Step 1:
Attach the front and rear upright supports
(#2 and #3) at the top by using bolts (#11),
washers (#16) and plastic nuts (#19).
Repeat the procedure for the other side.
Do not tighten plastic nuts and bolts yet.
See Fig. A - Step 1.
Step 3:
Fasten the lateral cross braces (#4) to the
upright supports (#2 and #3) by using bolts
(#12), washers (#17) and plastic nuts (#18).
See Fig. A - Step 3.
Step 4:
Fasten the rear cross brace (#5) to the rear
upright supports (#2) by using bolts (#12),
washers (#17) and plastic nuts (#18).
Insert the leg caps (#25) to all base feet.
Tighten the plastic nuts and bolts now.
See Fig. A - Step 4 and Step 5.
Step 5:
Fasten one seat and back support brace
(#6) to the seat of two seat assemblies (#7)
by using bolts (#14) and washers (#17).
See Fig. B.
Note:
Make sure the two arcs of the seat and back
support brace (#6) should be facing outside.
Seat
Seat
PAGE 3 OF 6
Fig. B
Fig. A
Step 5
Step 4
Step 3
Step 1
Do not tighten bolts
after Step 1. Fasten
all bolts after Fig A.
Step 2
Step 2:
Attach the top cross beam w/adjustable
teeth (#1) to both ends of the upright
supports (#2 and #3). See Fig. A - Step 2.
3
2
3
2
3
2
2
2
2
2
2
5
2
3
1
4
4
2
12
12
17
17
14
20
20
20
20
14
25
25
25
25
18
18
3
1
2
11
11
21
21
16
16
16
16
19
19
17
17
17
17
7
7
6
