CountyLine RBRC402CL, Руководство по эксплуатации и сборке

Страница: 25 / 40

25
LUBRICATION AND MAINTENANCE
LUBRICATION BEFORE EACH USE
1. Driveline Universal Joints
a. Apply multi-purpose grease with a grease gun.
2. Driveline Guard
b. Apply 2-3 shots of multipurpose grease with
grease gun to plastic fitting.
3. Driveline Profile
c. Disconnect PTO Driveline.
d. Pull two sections apart.
e. Apply thin coat of multi-purpose grease
to inside of female section.
f. Re-assemble sections.
NOTE:
Pull each section to be sure driveline and
shields are securely connected. Make certain PTO
shielding is in good condition. Do not grease outer
or inner plastic shields.
4. Tail wheel Pivot Tube
g. Apply multi-purpose grease with grease gun.
5. Tail wheel
h. Apply multi-purpose grease with grease gun.
6. Gearbox
i. Check oil level by removing oil level check plug
on side of gearbox.
j. Add 80W/90 or 85W/140 gear oil if necessary
to bring oil level to check plug hole.
OBSERVE LUBRICATION SYMBOLS
Lubricate with multipurpose grease.
(1) Before Each Use
(2) Before Each Use
(3) Before Each Use
(4) Before Each Use
(5) Before Each
Use
(6) Before Each Use
3d. Pull two sections apart.
7. Before each use, see the Rotary Cutter photo for
lubrication intervals and locations in this section.
8. During operation, listen for abnormal sounds,
which might indicate loose part, damaged
bearings, or other damage.
MAINTENANCE AFTER EACH USE
1. Clean all debris from Rotary Cutter especially
underside of deck. When cleaning underside of
deck, securely block machine into position.