County Materials Corporation Summit Stone Скачать руководство пользователя страница 11

43

Seasoning an 
Outdoor Fireplace 
(30-60-90 Rule)

The industry 
recommends a 
gradual seasoning 
for any outdoor 
wood burning 
fi replace.

After the Summit 
Stone Outdoor 
Fireplace 

construction is completed, follow these 
guidelines for the 30-60-90 Rule.

41

Summit Stone

®

Tumbled Landscape Units

Do not remove plywood 
template or continue 
installation of chimney units 
until the glue has dried 
completely.

When ready, install 
chimney units according 
to the guidelines. It may be 
necessary to cut the front row 

plywood 

templates

of chimney units to fi t around 
the arch and maintain a stepped 
out appearance.

Installing an 
Optional Front Arch

44

30

min.

Seasoning an 
Outdoor Fireplace 
(30-60-90 Rule)

Build a small wood 
fi re in the fi replace 
that will burn for 
approximately 
30 minutes and 
extinguish itself. 
Let the unit cool 
completely for a 
minimum of 
one day.

Day 1

42

Custom Outdoor  
Fireplace with 
Optional Arch

Note:

 The fi rst rows of the chimney 

need to be laid straight up, so the 
arch can be secured to it.

Содержание Summit Stone













Отзывы: