Version 1.0b
7
INGLENOOK PARTS REMOVAL
Once cleaning or installation of the Inglenook solid fuel fireplace is complete, it is time to remove some
parts that will not be required for gas operation. FIGURE 1 identifies each of these parts and TABLE 1 lists
each of these parts along with the Country Flame Part Number. Use TABLE 1 as a check sheet when
removing these parts. Once removed, the wood burning parts need to be properly packed and stored away
for potential future use. The homeowner should ensure proper storage of the Inglenook solid fuel parts.
Future conversion of the Inglenook gas log system back to a solid wood fuel system will require the use of
these parts. If the parts are lost, damaged, or worn, contact Country Flame or an authorized dealer to obtain
new parts before attempting wood burning operations in the Inglenook fireplace again.
FIGURE 1: INGLENOOK SOLID FUEL PARTS REMOVAL
TABLE 1 should be used as a checklist to ensure all solid (wood burning) fuel parts are removed. Once
removed, these parts should be stored for potential future conversion from gas logs back to solid wood
burning fuel.
FIGURE 1 ITEM
PART DESCRIPTON
PART NUMBER
REMOVED
(1) Log
Retainer
IN-201
(1)
¼ by 20 by ½ Security Bolt
PP-1225
(1)
¼ by 20 by ½ Security Bolt
PP-1225
(2)
Starter Air Intake Assembly
IN-54
(2)
¼ by 20 by ½ Bolt HHCS
PP-766
(2)
¼ by 20 by ½ Bolt HHCS
PP-766
(3) Ash
Grate
IN-47
(4)
Bottom Fire Brick #X1, 4 each
PP-868
(4)
Bottom Fire Brick #X2, 2 each
IN-202
(4)
Bottom Fire Brick #X3, 2 each
IN-203
(4)
Bottom Fire Brick #X4, 2 each
IN-204
(5) Ash
Pan
Box
IN-93
(5) Ash
Pan
Handle
PP-1192
(6)
Ash Pan Compartment Side Plate
IN-72
(6)
#8 by 32 by 3/8 TEK SMS, 4 each
PP-159
(7)
Gas Line Knock Out (left side)
disposable
TABLE 1:
INGLENOOK SOLID FUEL PARTS REMOVAL
