SAFETY
ACCIDENT PATTERNS TO AVOID
I.
CONTACT WITH THE ROTATING
BLADE --
This accident usually
happens when the operator is clearing
the discharge chute of grass, (especially
when the grass is wet), or when the
operator adjusts the machine without
turning it off and waiting for the blades
to completely stop.
II.
PROPELLED OBJECTS --
Sticks,
rocks, wires, and other objects can be
propelled out through the discharge
chute or from under the mower housing.
Bystanders are particularly vulnerable.
III.
GRASS CATCHER OR GUARD --
The
mower shall not be operated without
either the entire grass catcher or guard
in place.
IV. OVERTURNING
--
This happens when
riding mowers are used on steep
slopes, embankments or hills. The
operator in these cases can come in
contact with the blades or sustain
injuries during a fall.
V.
MOWER RUNNING OVER THE VICTIM
--
This usually happens when a riding
mower is driven in reverse. The
accident victims are most often young
children whom, unseen by the operator
of the mower, were in the area being
mowed.
WE SHARE YOUR DESIRE TO PROTECT
YOURSELF, YOUR FAMILY, YOUR FRIENDS
AND YOUR NEIGHBORS FROM ACCIDENTAL
INJURY. OBSERVING AND ENFORCING THE
FOLLOWING GUIDELINES WILL HELP TO
INSURE THE SAFETY OF EVERYONE.
PLEASE BE CAREFUL!
SAFETY INSTRUCTIONS AND
RECOMMENDATIONS
1.
PEOPLE WHO OPERATE, SERVICE,
OR ARE OTHERWISE ASSOCIATED
with the Zero Turning Radius Mower
should be trained in its proper use and
warned of its dangers. Before
operating, adjusting, or servicing the
Zero Turning Radius Mower they should
read and understand this entire manual
and the engine owner’s manual.
2.
AVOID CONTACT WITH MOVING
PARTS.
Keep hands and feet from
under mowing deck and away from
blades at all times. Turn engine (motor)
off if you must unclog the chute.
3.
AVOID HILLS AND SLOPES.
Use
extreme caution when mowing up or
down slopes. NEVER mow across the
face of a slope. If a slope must be
ascended, back up the slope; drive
forward when descending. Reduce
speed and use caution to start, stop and
maneuver. To prevent loss of control on
a slope avoid sharp turns, sudden
changes in direction, and sudden stops
and starts.
4.
DISENGAGE POWER TO MOWER
BEFORE BACKING UP.
Do not mow
in reverse unless ABSOLUTELY
necessary and then only after turning
around and observing the entire area
behind the mower. Go slowly. Most
“running over victim” accidents occur in
reverse.
5.
BEGINNING OPERATORS SHOULD
LEARN HOW TO STEER
the Zero
Turning Radius Mower before
attempting to mow. Start with slow
engine speed and drive without the
blades engaged in an open area until
comfortable with the machine.
6.
KNOW HOW TO STOP QUICKLY.
Know the location and operation of
every control, especially how to brake
and how to disengage the mower
blades.
7.
DO NOT MOVE STEERING CONTROL
LEVERS
from forward position to
1 P-11456