Country Clipper 2204MT Скачать руководство пользователя страница 10

MOWING RECOMMENDATIONS 

3.

 

When mowing tall grass, make two 
passes, mowing off 1/2 of the desired 
cut on the first pass, and then the 
desired height the second pass.  Check  

 

1.

 

Keep mower blades sharp. 

 

for hidden dangers first. 

2.

 

Make sure deck and discharge are 
clean. 

 

4.

 

Go slowly for trimming. 

 

 

     

CAUTION

      

 

5.

 

Always cut grass with the engine at full 
throttle speed.  This “ENGINE” speed 
allows the cutting blades to operate at 
optimum cutting speed.  Control 
“GROUND” speed with the Steering 
Control Levers. 

 

POWER MUST BE OFF TO CLEAN 

DISCHARGE CHUTE.  TURN ENGINE OFF 

AND WAIT FOR ALL MOVING PARTS TO 

STOP. 

 

 

6.

 

Vary ground speed to suit conditions 
(i.e. go slower in tall thick grass, on hills, 
wet conditions, etc.). 

 
 

 

MAINTENANCE 

 

Replace decals when illegible.  Write factory for free replacement. 

 
 

     

CAUTION

      

 

 

BEFORE PERFORMING ANY MAINTENANCE, TURN OFF ENGINE 

REMOVE KEY AND DISCONNECT SPARK PLUGS.  USE EXTREME CARE WHEN WORKING ON 

MACHINERY.  DO NOT WEAR WATCHES OR JEWELRY.  DO NOT WEAR LOOSE FITTING 

CLOTHES, AND OBSERVE ALL COMMON SAFETY PRACTICES WITH TOOLS. 

 

 

MAINTENANCE SCHEDULE 

 

SERVICE 

 

 

 

 

 

 

 

 WHEN 

Check crankcase oil level  ---------------------------------------------------------------------  before each use 

 

Clean grass from Hydrostat fans and cooling fans  --------------------------------------  before each use 

 

Check air intake screen  ---------------------------------------------------------------------------  after each use 

 

Clean grass under deck  --------------------------------------------------------------------------  after each use 

 

Check tire pressure  -------------------------------------------------------------------------------  every 10 hours 

 

Check battery fluid  --------------------------------------------------------------------------------  every 10 hours 

 

Sharpen mower blades  --------------------------------------------------------------------------  every 10 hours 

 

Clean air filter pre-cleaner element  -----------------------------------------------------------  every 25 hours 

 

Check Hydrostatic transmission fluid  ---------------------------------------------------------  every 25 hours 

 

Check drive belts  ----------------------------------------------------------------------------------  every 50 hours 
 

 

 

 

 

 

 

                                 (20 hours break-in) 

 

Service Air Cleaner Filter Element  ----------------------------------------------------------  every 100 hours 

 

Change engine crankcase oil  -------------------------------------------------------------------------  100 hours 
 

 

        oil filter  --------------------------------------------------------------------------  200 hours 

Change Hydrostat oil and oil filter  -----------------------------------------------------------  every 500 hours 
          

 

 

 

 

 

(100 

hours 

break-in) 

Replace air filter element  ---------------------------------------------------------------  annually or 500 hours 

 

Check spark plugs  ------------------------------------------------------------------------  annually or 500 hours 

 

Service battery  ----------------------------------------------------------------------------  annually or 500 hours 

MAINTENANCE INSTRUCTIONS 

6                                                                   P-11456   

Содержание 2204MT




















Отзывы: